TRAINING RELIABILITY, AVAILABILITY AND MAINTAINABILITY ANALYSIS
TRAINING PENGENALAN RELIABILITY, AVAILABILITY AND MAINTAINABILITY ANALYSIS
TRAINING KONSEP MAINTAINABLILITY ANALYSIS
INTRODUCTION
Reliability, availability and maintainability (RAM) is one of the most
current maintenance program used in oil and gas industry at design
(FEED) stage or in operation stage. The reliability data, in terms of
MTTF, MTBF will be evaluated for each individual equipment and system.
The reliability of the system is determined using a reliability block
diagram by considering serial or parallel arrangement of the equipment
that construct the system (e.g. gas process plant). Maintainability is
defined, and assumptions are made according to data history of similar
equipment/system or engineering judgment.
Sensitivity analysis is also performed for various cases of MTTR
including logistical support for parts and materials to evaluate which
factors become the major contributors to the maintainability and
availability. For RAM modeling, various foreseeable scenarios,
including the effect of logistic time delay, can also be developed.
The major cause for unreliability and unavailability related to down
time will be discussed, and the necessary steps to avoid that
condition will be recommended. In this training, the OREDA (2004), BS
5760 and ISO 14224 as primary RAM sources will be consulted.
BENEFIT
RAM analysis will benefit the maintenance engineers to manage both
rotating and static equipments and their asset in more quantitative
manner using proper statistics data generated from historic or well
known reliability data based. Unavailability of the equipments and
plants can therefore be numerically predicted and so plant downtime
can be more managed.
OUTLINE
1. Defining the system by utilize the PFDs, P&IDs and equipment lists
2. Obtaining necessary failure rate data and repair from reliable
resources, e.g. OREDA and in accordance with the industry standard
ISO 14224
3. Determine individual equipment reliability
4. Determining the MTTR Calculating reliability and availability of
the system (plant level)
5. Performing sensitivity modeling for various cases of MTTR
including logistic supports for parts and materials
6. Outlining the major causes of non-availability and production
inefficiency and propose improvements to the equipment/systems
maintenance programs where appropriate
WHO SHOULD ATTEND
Plant and Pipeline Operators, Supervisors, Engineers and Manager
TRAINING METHODE
Presentation
Discussion
Case Study
Evaluation
JADWAL TRAINING TAHUN 2026
03 – 04 Januari 2026 | 16 – 17 Januari 2026
06 – 07 Februari 2026 | 20 – 21 Februari 2026
05 – 06 Maret 2026 | 19 – 20 Maret 2026
03 – 04 April 2026 | 23 – 24 April 2026
07 – 08 Mei 2026 | 21 – 22 Mei 2026
05 – 06 Juni 2026 | 25 – 26 Juni 2026
09 – 10 Juli 2026 | 23 – 24 Juli 2026
06 – 07 Agustus 2026 | 20 – 21 Agustus 2026
04 – 05 September 2026 | 18 – 19 September 2026
08 – 09 Oktober 2026 | 22 – 23 Oktober 2026
06 – 07 November 2026 | 26 – 27 November 2026
04 – 05 Desember 2026 | 18 – 19 Desember 2026
Metode Training
- Tatap Muka/offline
- Online via zoom
Kota Penyelenggaraan jika offline :
- Bandung
- Jogjakarta
- Surabaya
- Jakarta
fasilitas yang didapatkan
- Training Kit Eksklusif
- Tas
- Name Tag
- Modul
- Flash disk
- Ballpoint
- Block Note
- Souvenir
- Harga yang Reliable
- Trainer Kompeten di bidangnya
- Pelayanan Maksimal untuk peserta
- Penjemputan dari dan ke bandara
Investasi :
Public training : Rp. 4.500.000 (minimum 3 pax)
In House Training : on Call
