TRAINING PREVENTIVE AND PREDICTIVE MAINTENANCE

TRAINING PENGENALAN PREVENTIVE AND PREDICTIVE MAINTENANCE

TRAINING SISTEM PERAWATAN

OBJECTIVE

Preventive  and  predictive  maintenance is a maintenance system which
very  reliable  to  prevent some sudden troubles or breakdown that may
happened  on factory’s tools/equipment. The sudden troubles are very
potential  things  that  caused  a big loss in production process. The
effects of this problem are some failure to achieve production target,
the  lack  of  personnel,  unprepared spare parts, etc. Preventive and
predictive   maintenance   application  system  starts  from  standard
arranging,  activity  planning,  realization  supervising  and  as the
finish line is evaluating and analyzing the maintenance’s result

Â

COURSE CONTENT

1. Preventive and Predictive Maintenance Economics
* Past Sins
* Costs of Setup and Ongoing Costs
* True Breakdown Costs
* Case Study

2.   Justifying   (Selling)   Preventive  Maintenance  and  Predictive
Maintenance Expenditures
* Some Benefits of PPM
* Selling Preventive Maintenance/Predictive Maintenance
* Benefits of Preventive Maintenance/Predictive Maintenance

3. Basic Understanding of Preventive Maintenance
* What is Preventive Maintenance?
* Understanding   What   Preventive   Maintenance   is  Supposed  To
Accomplish and The Critical Event
* Appropriate  Preventive  Maintenance  Strategy for The 3 Equipment
Life Cycles and 6 Failure Modes
* Maintenance  Improvement Curve – How To Get The Most Bang for Your
Buck

4. CMMS Approaches to Preventive and Predictive Maintenance
* Steps To Install A Preventive and Predictive Maintenance System
* Survey Instructions
* Preventive Maintenance and Predictive Maintenance Systems Increase
Professionalism

5. PM Details for Effectiveness
* Four Types of Task Lists
* PM Frequency and Its Effect On Breakdown

6. Task List Development
* Assemble The Right Data
* Look for The Most Dangerous, Most Expensive or Most Common Failure
Modes
* Choosing Tasks

7. TLC (Tighten, Lubricate and Clean)
* Cleaning
* Bolting
* Lubricating

8. Guidelines for Involvement with Predictive Techniques
* Questions To Ask Before PdM
* Oil Analysis
* Vibration Analysis
* Temperature Measurement
* Ultrasonic Inspection
* Advanced Visual Techniques
* Other Methods of Predictive Maintenance
* TLC-Tighten, Lubricate, Clean

9. Management of PM Activity
* Planning and Scheduling PM Activity
* Access To Equipment
* Interruptive Maintenance and Non-Interruptive Maintenance
* Metrics
* Outsourcing PM

10. Task List Analysis
* Complete Analysis of Task Lists (Line By Line)

11. Advanced Concepts: PM at The Next Level
* P-F Curve
* Statistical Analysis
* PCR

12. Personnel Issues
* Staffing The PM Effort
* What Kind of Personality To Look for In A PM Inspector
* How To Insure That PMs Are Done As Designed

13. Developing a Unique Action Plan
* Review Material
* Prepare and Discuss Action Lists

14. Troubleshooting

PARTICIPANT

This  special  course  is  designed for manager, supervisor, engineer,
planer,   foreman,   and   technician,   operations,  engineering  and
purchasing division.

TRAINING METHOD

Presentation

Discussion

Case Study

Evaluation

JADWAL TRAINING TAHUN 2023

17 – 18 Januari 2023

14 – 15 Februari 2023

20 – 21 Maret 2023

4 – 5 April 2023

16 – 17 Mei 2023

20 – 21 Juni 2023

17 – 18 Juli 2023

15 – 16 Agustus 2023

25 – 26 September 2023

17 – 18 Oktober 2023

21 – 22 November 2023

27 – 28 Desember 2023

Metode Training

1. Tatap Muka/offline
2. Online via zoom

Kota Penyelenggaraan jika offline :

1. Bandung
2. Jogjakarta
3. Surabaya
4. Jakarta

fasilitas yang didapatkan

1. Training Kit Eksklusif
   • Tas
   • Name Tag
   • Modul
   • Flash disk
   • Ballpoint
   • Block Note
   • Souvenir
2. Harga yang Reliable
3. Trainer Kompeten di bidangnya
4. Pelayanan Maksimal untuk peserta
5. Penjemputan dari dan ke bandara

Investasi :

Public training : Rp. 4.500.000 (minimum 3 pax)

In House Training : on Call