TRAINING BOILER CONTROL AND BURNER MANAGEMENT SYSTEM

TRAINING PEMAHAMAN BOILER CONTROL

TRAINING PERANAN BOILER CONTROL

LATAR BELAKANG

The  boiler  components  and  their purpose. Standard symbols that are
used  in boiler control and identifying the engineering and control of
boilers  using the symbols and a method of presenting the engineering.
The   course   includes   defining   the  control  and  ratio  control
fundamentals  feed  forward  control,  feed  forward  plus  feed  back
control,   cascade   control  and  ratio  control  and  how  they  are
implemented in boiler control.

Also reviewed are control concepts proportional controls, proportional
plus  reset  control,  and  proportional  plus  reset, plus derivative
controlling  what  they  are  and  how  they are used. Flame detection
methods are covered including the advantages of each method.

Systems  for  the safe start-up, monitoring, and shut-down of multiple
burner  boiler  furnaces  are  covered  in  detail.  Causes of furnace
explosions  and  ways of avoiding them are discussed. The relationship
of  burner management systems and boiler control systems is explained.
An understanding of boilers and boiler control is assumed.

Â

TUJUAN PELATIHAN

Participant will be able to :
1. Understand  the  benefits  of  improved boiler process control and
savings as a result of improved efficiency
2. Develop proper control systems documentation
3. Apply  principles  and  methods for flow and level measurements to
improved boiler operations
4. Specify  appropriate  strategies  for  flow,  level  and  pressure
control
5. Tuning of boiler control systems
6. Implement analyzer measurements for improving boiler efficiency
7. Analyze basic control loops required for boiler operation
8. Apply  control  concepts  such  as  cascade, ratio and feedforward
control for boiler control
9. Specify appropriate safety system interlocks
10. Evaluate   process   requirements   for   writing  instrumentation
specifications
11. Understand the primary cause of furnace explosions
12. Use design basis documentation and flow sheets
13. Identify equipment needs for gas, oil, and pulverized coal systems
14. Understand  pre-firing  purge  requirements  for  both  single and
multiple burner boilers
15. Follow the ignition-permissive establishment procedures for single
and multiple burner systems
16. Implement flame failure protection for specific systems
17. Design alarms, interlocks, and emergency shutdown systems
18. Understand  the  function  and  use  of the burner front, operator
interfaces, and logic systems

MATERI Training Boiler Control and Burner Management System
1. Basic Control Loops
2. Combustion of Fuels
3. Fuel Gas Analysis
4. Steam Supply and Firing Rate Demand
5. Feedwater Control Systems
6. Boiler Draft Systems
7. Combustion Control
8. Improving Operations with Computers and Analyzers
9. Emerging Technologies
10. Causes of Furnace Explosions
11. BMS Interlock and Alarm Systems
12. Control Systems
13. System Design Trip Philosophy
14. Programmable Electronic Systems
15. Develop P&IDs for the boiler and gas, oil, and pulverized coal
16. Review methods of efficiency calculations
17. Use  personal  computer  software  to simulate boiler start-up and
shutdown,   and   boiler   control   including   drum   level  and
cross-limiting fuel control
18. Tune  a boiler control system for maximum efficiency and learn the
effects of boiler tuning

TRAINING METHOD

Presentation

Discussion

Case Study

Evaluation

JADWAL TRAINING TAHUN 2026

03 – 04 Januari 2026 | 16 – 17 Januari 2026

06 – 07 Februari 2026 | 20 – 21 Februari 2026

05 – 06 Maret 2026 | 19 – 20 Maret 2026

03 – 04 April 2026 | 23 – 24 April 2026

07 – 08 Mei 2026 | 21 – 22 Mei 2026

05 – 06 Juni 2026 | 25 – 26 Juni 2026

09 – 10 Juli 2026 | 23 – 24 Juli 2026

06 – 07 Agustus 2026 | 20 – 21 Agustus 2026

04 – 05 September 2026 | 18 – 19 September 2026

08 – 09 Oktober 2026 | 22 – 23 Oktober 2026

06 – 07 November 2026 | 26 – 27 November 2026

04 – 05 Desember 2026 | 18 – 19 Desember 2026

Metode Training

1. Tatap Muka/offline
2. Online via zoom

Kota Penyelenggaraan jika offline :

1. Bandung
2. Jogjakarta
3. Surabaya
4. Jakarta

fasilitas yang didapatkan

1. Training Kit Eksklusif
   • Tas
   • Name Tag
   • Modul
   • Flash disk
   • Ballpoint
   • Block Note
   • Souvenir
2. Harga yang Reliable
3. Trainer Kompeten di bidangnya
4. Pelayanan Maksimal untuk peserta
5. Penjemputan dari dan ke bandara

Investasi :

Public training : Rp. 4.500.000 (minimum 3 pax)

In House Training : on Call